Application: The main function of this equipment is to cut the battery cell after the code is finished. This equipment can complete the art of battery cell cutting and cutting.In line with quick changeover (0.5H), product safety assurance is improved, and product accuracy is improved to develop equipment, the brief information is as follows: Parameters: …
Application: The equipment uses semi-automatically to complete the OCV, electrode cutting and shaping of the cell. This equipment is a four-position rotary table: manual loading position, OCV detection and pre-shaping position, pole cutting position, pole shaping position; the mechanical part is realized by the use of servo motors and SMC cylinders. Convergence between various positions. …
Pouch cell semi-automatic cutting and shaping machine Read More »
Application: The machine adopts full automatic measurement of the length, width and thickness of pouch cells. The machine is equipped with edge gateways, data acquisition systems, code scanning card stations, and real-time data upload and traceability management MES system. This machine adopts a four-position layout: width detection position, head thickness detection position, body thickness detection …
Pouch cell automatic length & width & thickness inspection machine Read More »
Application: The machine automatically completes the welding process of the PCM board of the battery cell. The machine is equipped with an edge gateway, a data acquisition system, a code scanning card station, and a real-time data upload and traceability management MES system. Adopting four process mechanisms of the turntable: feeding and discharging process position, …
Application: This machine is to stick&wrap tape for cells, its characteristic is that the tape can be fed in rolls without pre-cutting, it can be automatically cut, pasted and wrapped, and the workbench is a turntable, the brief information is as follows: Parameters: Size: 1100mm × 930mm × 1900mm Efficiency: ≥15ppm Scrap rate caused by …
Application: This machine is applied to cylindrical cell sticking, the surface pad material is highland barley paper or PVC material, slow wire walking, high precision, include 21 inch LCD screen + PC synchronous display + industrial computer, the brief information is as follows: Parameters: Equipment power supply: single phase ~ 220V, 50Hz Rated power: 1.5KW. …
Application: This machine is applied to cylindrical cell sticking&sorting, the surface pad material is highland barley paper or PVC material, slow wire walking, high precision, include 21 inch LCD screen + PC synchronous display + industrial computer, the brief information is as follows: Parameters: Equipment power supply: single-phase ~ 220V, 50Hz Cells: 18650 (21700, 26650, …
Sticking & Sorting machine for cylindrical cells Read More »
Application: This machine is applied to cylindrical cell double-side welding. Functions are: the welding head can rotate by 180°, the welding is consistent, the welding needle is not sticky, the welding needle wear is automatically compensated, the poor welding alarm, real-time monitoring, recording, welding current automatic feedback compensation, motion controller, display and non-array battery pack, …
Application: This battery cell assembly line is applied to prismatic cells PACK process. This consists of four parts: cell processing section, cell stacking section, module welding section, and PACK assembly section. Our design varies from customer requirements, the brief information is as follows : Parameters:Prismatic cells: 90-250mm × 80-350T20-100mmCapacity: 30PPMSize: 62000mm × 15000mm × 5000mm
Application: This line is applied to the cylindrical cell PACK process, and can be applied to electric two-wheelers, tricycles, electric tools, outdoor energy storage and other lithium ion battery manufacturing. The number of single module cells is 10-300. Our design varies from customer requirements, the brief information is as follows : Parameters:Size: 26m × 2m …