China wholesale sodium battery factory manufacturer supplier

Application:This machine consists of five parts: unwinding unit, coating unit (including feeding system), drying unit, discharging unit, and winding unit, which is used for battery electrode sheet production, and can also be used for glue coating, with high precision, oven length, coating width, coating speed, etc. can be customized according to customer requirements. No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Fit Substrate RangeAI Foil/9~16μm       Cu Foil/4.5~14μm3Fit Roll RangeMax.600mm4Fit Substrate Width RangeMax.680mm5Coating Speed RangeMax.12m/min6Coating Drying Oven3~21m7Coating Surface Density Error≤±1.5%8Tension Control±2N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical PowerCalculate by the drying oven length and heat source mode11Devices Air Source0.5~0.8MPa, 5m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application:This machine consists of five parts: unwinding unit, coating unit (including feeding system), drying unit, discharging unit, and winding unit, which is used for battery electrode sheet production, and can also be used for glue coating. Double-sided coating is possible, with high precision, oven length, coating width, coating speed, etc. can be customized according to…

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 11m × 3m × 3mCapacity: ≥15 ppmYield: 99.8%

Application: The equipment uses semi-automatically to complete the OCV, electrode cutting and shaping of the cell. This equipment is a four-position rotary table: manual loading position, OCV detection and pre-shaping position, pole cutting position, pole shaping position; the mechanical part is realized by the use of servo motors and SMC cylinders. Convergence between various positions.…

Application: This battery cell assembly line is applied to prismatic cells PACK process. This consists of four parts: cell processing section, cell stacking section, module welding section, and PACK assembly section. Our design varies from customer requirements, the brief information is as follows : Parameters:Prismatic cells: 90-250mm × 80-350T20-100mmCapacity: 30PPMSize: 62000mm × 15000mm × 5000mm

Application: This production line is applied in mobile phone battery & electronic product battery PACK process. It is a customized for lithium battery manufacturing. Our design varies from customer requirements, the brief information is as follows: Parameters:Size: 26m × 1.2 m × 1.8mCapacity: ≥15 ppm (cells)Yield: 99.8%

Features:Used for MOBILE PHONE, TWS, TP, LAPTOP, WIRELESS CHARGER, FPC etc.Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machineUse CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line changeCan read QR code, upload MES, traceableUsing belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: This machine is applied to cylindrical cell double-side welding. Functions are: the welding head can rotate by 180°, the welding is consistent, the welding needle is not sticky, the welding needle wear is automatically compensated, the poor welding alarm, real-time monitoring, recording, welding current automatic feedback compensation, motion controller, display and non-array battery pack,…

Application: The machine adopts full automatic measurement of the length, width and thickness of pouch cells. The machine is equipped with edge gateways, data acquisition systems, code scanning card stations, and real-time data upload and traceability management MES system. This machine adopts a four-position layout: width detection position, head thickness detection position, body thickness detection…