China wholesale battery tab spot welding machine factory manufacturer supplier

Application: This battery cell assembly line is applied to prismatic cells PACK process. This consists of four parts: cell processing section, cell stacking section, module welding section, and PACK assembly section. Our design varies from customer requirements, the brief information is as follows : Parameters:Prismatic cells: 90-250mm × 80-350T20-100mmCapacity: 30PPMSize: 62000mm × 15000mm × 5000mm

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machineUse CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line changeCan read QR code, upload MES, traceableUsing belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: This machine mainly uses CCD to complete the inspection automatically, and the front machine nickel laser welding spot inspection. The machine is equipped with edge gates, data acquisition system, code scanning card station, real-time data upload and traceability management MES system, and the next position of qualified products is checked for extreme bending. After…

Application: The machine automatically completes the welding process of the PCM board of the battery cell. The machine is equipped with an edge gateway, a data acquisition system, a code scanning card station, and a real-time data upload and traceability management MES system. Adopting four process mechanisms of the turntable: feeding and discharging process position,…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Production SpeedMax: 120m/min(Continuous coating)3Fit Roll Range200~1400mm4Fit Substrate Width RangeMax. 1350mm5Linear PressureMax. 6.5t/cm6Tension fluctuation±2N7Stretch tension control range30~1200N8Tension Control30~500N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical Power≤100KW11Devices Air Source0.5~0.8MPa, 10m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application: This machine is applied to cylindrical cell double-side welding. Functions are: the welding head can rotate by 180°, the welding is consistent, the welding needle is not sticky, the welding needle wear is automatically compensated, the poor welding alarm, real-time monitoring, recording, welding current automatic feedback compensation, motion controller, display and non-array battery pack,…

Application: This production line is applied in notebook/iPad cell pack. It is a customized and with the highest degree of integration. Our design varies from customer requirements, the brief information is as follows: Parameters:Size: 32m × 1.5 m × 1.8mCapacity: ≥15 ppm (cells)Yield: 99.8%

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 6.95m × 3.0m × 2.2mCapacity: ≥20 ppmYield: ≥99.0%

Application: This production line is applied in mobile phone battery & electronic product battery PACK process. It is a customized for lithium battery manufacturing. Our design varies from customer requirements. The brief information is as follows: Parameters:Size：26m * 1.2 m * 1.8mCapacity：≥15 ppm (cells)Yield： 99.8%