China wholesale roller coating machine factory manufacturer supplier

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Production SpeedMax: 120m/min(Continuous coating)3Fit Roll Range200~1400mm4Fit Substrate Width RangeMax. 1350mm5Linear PressureMax. 6.5t/cm6Tension fluctuation±2N7Stretch tension control range30~1200N8Tension Control30~500N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical Power≤100KW11Devices Air Source0.5~0.8MPa, 10m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application: The main function of this equipment is to cut the battery cell after the code is finished. This equipment can complete the art of battery cell cutting and cutting.In line with quick changeover (0.5H), product safety assurance is improved, and product accuracy is improved to develop equipment, the brief information is as follows: Parameters:…

Application: This battery cell assembly line is applied to prismatic cells PACK process. This consists of four parts: cell processing section, cell stacking section, module welding section, and PACK assembly section. Our design varies from customer requirements, the brief information is as follows : Parameters:Prismatic cells: 90-250mm × 80-350T20-100mmCapacity: 30PPMSize: 62000mm × 15000mm × 5000mm

Application:This machine consists of five parts: unwinding unit, coating unit (including feeding system), drying unit, discharging unit, and winding unit, which is used for battery electrode sheet production, and can also be used for glue coating, with high precision, oven length, coating width, coating speed, etc. can be customized according to customer requirements. No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Fit Substrate RangeAI Foil/9~16μm       Cu Foil/4.5~14μm3Fit Roll RangeMax.600mm4Fit Substrate Width RangeMax.680mm5Coating Speed RangeMax.12m/min6Coating Drying Oven3~21m7Coating Surface Density Error≤±1.5%8Tension Control±2N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical PowerCalculate by the drying oven length and heat source mode11Devices Air Source0.5~0.8MPa, 5m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machineUse CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: This production line is applied in mobile phone battery & electronic product battery PACK process. It is a customized for lithium battery manufacturing. Our design varies from customer requirements, the brief information is as follows: Parameters:Size: 26m × 1.2 m × 1.8mCapacity: ≥15 ppm (cells)Yield: 99.8%

Application: This machine is to stick&wrap tape for cells, its characteristic is that the tape can be fed in rolls without pre-cutting, it can be automatically cut, pasted and wrapped, and the workbench is a turntable, the brief information is as follows: Parameters: Size: 1100mm × 930mm × 1900mmEfficiency: ≥15ppmScrap rate caused by machine: less…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: The equipment uses semi-automatically to complete the OCV, electrode cutting and shaping of the cell. This equipment is a four-position rotary table: manual loading position, OCV detection and pre-shaping position, pole cutting position, pole shaping position; the mechanical part is realized by the use of servo motors and SMC cylinders. Convergence between various positions.…

Application: The machine uses semi-automatic to complete the thickness measurement of the battery cell. This equipment includes: bottom frame, lithium battery fixture platform, thickness measuring mechanism, Z-axis guide mechanism, lever balance mechanism, etc. The mechanical part uses servo motors to realize the connection between various actions. The control part is composed of the HMI (human-machine…