China wholesale cell calender machine factory manufacturer supplier

Application: This equipment is applied in battery cell electrolyte filling, and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters:Size: 9.5m × 2.0m × 2.2mCapacity: varies customers' requirementsYield: ≥99.9%Cell: cylindrical cells, prismatic cells

Application:This machine consists of five parts: unwinding unit, coating unit (including feeding system), drying unit, discharging unit, and winding unit, which is used for battery electrode sheet production, and can also be used for glue coating, with high precision, oven length, coating width, coating speed, etc. can be customized according to customer requirements. No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Fit Substrate RangeAI Foil/9~16μm       Cu Foil/4.5~14μm3Fit Roll RangeMax.600mm4Fit Substrate Width RangeMax.680mm5Coating Speed RangeMax.12m/min6Coating Drying Oven3~21m7Coating Surface Density Error≤±1.5%8Tension Control±2N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical PowerCalculate by the drying oven length and heat source mode11Devices Air Source0.5~0.8MPa, 5m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 6.95m × 3.0m × 2.2mCapacity: ≥20 ppmYield: ≥99.0%

Features:Used for MOBILE PHONE, TWS, TP, LAPTOP, WIRELESS CHARGER, FPC etc.Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing…

Application: This line is applied to the cylindrical cell PACK process, and can be applied to electric two-wheelers, tricycles, electric tools, outdoor energy storage and other lithium ion battery manufacturing. The number of single module cells is 10-300. Our design varies from customer requirements, the brief information is as follows : Parameters:Size: 26m × 2m…

Application: This machine is to stick&wrap tape for cells, its characteristic is that the tape can be fed in rolls without pre-cutting, it can be automatically cut, pasted and wrapped, and the workbench is a turntable, the brief information is as follows: Parameters: Size: 1100mm × 930mm × 1900mmEfficiency: ≥15ppmScrap rate caused by machine: less…

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Roll Slitting SpeedMax: 120m/min(Continuous coating)3Incoming Material ParameterWidth: 200~1400mm4Unreeling DiameterMax: 1100mm5Rolling DiameterMax: 700mm 6Electrode thickness accuracy after roll pressing±1.5μm7Roll PressureMax: 600T8Cutting and winding alignment±0.5mm9Cutting accuracy of CPC alignment correction system±0.3mm

Application: The machine uses semi-automatic to complete the thickness measurement of the battery cell. This equipment includes: bottom frame, lithium battery fixture platform, thickness measuring mechanism, Z-axis guide mechanism, lever balance mechanism, etc. The mechanical part uses servo motors to realize the connection between various actions. The control part is composed of the HMI (human-machine…

Application: This machine mainly uses CCD to complete the inspection automatically, and the front machine nickel laser welding spot inspection. The machine is equipped with edge gates, data acquisition system, code scanning card station, real-time data upload and traceability management MES system, and the next position of qualified products is checked for extreme bending. After…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…