China wholesale one-stop solutions for battery factory manufacturer supplier

Application: This production line is applied in notebook/iPad cell pack. It is a customized and with the highest degree of integration. Our design varies from customer requirements, the brief information is as follows: Parameters:Size: 32m × 1.5 m × 1.8mCapacity: ≥15 ppm (cells)Yield: 99.8%

Application: This production line is applied in mobile phone battery & electronic product battery PACK process. It is a customized for lithium battery manufacturing. Our design varies from customer requirements. The brief information is as follows: Parameters:Size：26m * 1.2 m * 1.8mCapacity：≥15 ppm (cells)Yield： 99.8%

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Production SpeedMax: 120m/min(Continuous coating)3Fit Roll Range200~1400mm4Fit Substrate Width RangeMax. 1350mm5Linear PressureMax. 6.5t/cm6Tension fluctuation±2N7Stretch tension control range30~1200N8Tension Control30~500N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical Power≤100KW11Devices Air Source0.5~0.8MPa, 10m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 11m × 3m × 3mCapacity: ≥15 ppmYield: 99.8%

Application: This equipment is applied in battery cell cleaning and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 9.5m × 2.0m × 2.2mCapacity: ≥18 ppmYield: ≥99.0%

Application: The machine adopts full automatic measurement of the length, width and thickness of pouch cells. The machine is equipped with edge gateways, data acquisition systems, code scanning card stations, and real-time data upload and traceability management MES system. This machine adopts a four-position layout: width detection position, head thickness detection position, body thickness detection…

Features:Used for MOBILE PHONE, TWS, TP, LAPTOP, WIRELESS CHARGER, FPC etc.Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing…

Application: This equipment is applied for the cell stacking process and is a customized machine. our design varies customers' requirements, the brief information is as follows: Parameter:Size: 9.45m×6.1m×2.8m (L×W×H)Capacity： ≥3 ppm (31 layers)Range： Lmax / 150mm, Wmax / 120mmAccuracy：±0.1mm

Application: This machine is applied to cylindrical cell double-side welding. Functions are: the welding head can rotate by 180°, the welding is consistent, the welding needle is not sticky, the welding needle wear is automatically compensated, the poor welding alarm, real-time monitoring, recording, welding current automatic feedback compensation, motion controller, display and non-array battery pack,…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…