China wholesale mixing machine factory manufacturer supplier

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Production SpeedMax: 120m/min(Continuous coating)3Fit Roll Range200~1400mm4Fit Substrate Width RangeMax. 1350mm5Linear PressureMax. 6.5t/cm6Tension fluctuation±2N7Stretch tension control range30~1200N8Tension Control30~500N9Devices Power SupplyAC380V±10%, 3Ph, 50Hz10Total Electrical Power≤100KW11Devices Air Source0.5~0.8MPa, 10m³/h12Devices Failure Rate≤2%13Product Qualification Rate≥99%

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 11m × 3m × 3mCapacity: ≥15 ppmYield: 99.8%

Application: This line is applied to the cylindrical cell PACK process, and can be applied to electric two-wheelers, tricycles, electric tools, outdoor energy storage and other lithium ion battery manufacturing. The number of single module cells is 10-300. Our design varies from customer requirements, the brief information is as follows : Parameters:Size: 26m × 2m…

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machineUse CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line changeCan read QR code, upload MES, traceableUsing belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: The machine automatically completes the welding process of the PCM board of the battery cell. The machine is equipped with an edge gateway, a data acquisition system, a code scanning card station, and a real-time data upload and traceability management MES system. Adopting four process mechanisms of the turntable: feeding and discharging process position,…

Application:This machine is used for compacting the electrode sheet after coating process, and it can also keep the surface smooth and flat to prevent the short circuit caused by burr on electrode sheets surface piercing the separator. With high precision, stable performance and reasonable structure, it can be customized according to customer requirements No.ItemsSpecification1Devices External SizeAccording to the Technical agreement requirement2Roll Slitting SpeedMax: 120m/min(Continuous coating)3Incoming Material ParameterWidth: 200~1400mm4Unreeling DiameterMax: 1100mm5Rolling DiameterMax: 700mm 6Electrode thickness accuracy after roll pressing±1.5μm7Roll PressureMax: 600T8Cutting and winding alignment±0.5mm9Cutting accuracy of CPC alignment correction system±0.3mm

Application: This production line is applied in mobile phone battery & electronic product battery PACK process. It is a customized for lithium battery manufacturing. Our design varies from customer requirements. The brief information is as follows: Parameters:Size：26m * 1.2 m * 1.8mCapacity：≥15 ppm (cells)Yield： 99.8%

Application: This equipment is applied for the cell stacking process and is a customized machine. Our design varies customers' requirements, the brief information is as follows: Parameters: Size: 9.45m × 6.1m × 2.8mCapacity: ≥3 ppm (31 layers)Range: Lmax / 150mm, Wmax / 120mmAccuracy: ±0.1mm

Application: This machine mainly uses CCD to complete the inspection automatically, and the front machine nickel laser welding spot inspection. The machine is equipped with edge gates, data acquisition system, code scanning card station, real-time data upload and traceability management MES system, and the next position of qualified products is checked for extreme bending. After…

Application:This machine consists of five parts: unwinding unit, coating unit (including feeding system), drying unit, discharging unit, and winding unit, which is used for battery electrode sheet production, and can also be used for glue coating. Double-sided coating is possible, with high precision, oven length, coating width, coating speed, etc. can be customized according to…