China wholesale battery automation factory manufacturer supplier

Application: This machine is to stick&wrap tape for cells, its characteristic is that the tape can be fed in rolls without pre-cutting, it can be automatically cut, pasted and wrapped, and the workbench is a turntable, the brief information is as follows: Parameters: Size: 1100mm × 930mm × 1900mmEfficiency: ≥15ppmScrap rate caused by machine: less…

Application: This equipment is applied for the cell stacking process and is a customized machine. our design varies customers' requirements, the brief information is as follows: Parameter:Size: 9.45m×6.1m×2.8m (L×W×H)Capacity： ≥3 ppm (31 layers)Range： Lmax / 150mm, Wmax / 120mmAccuracy：±0.1mm

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machineUse CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: This equipment is applied in battery cell manufacturing and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters: Size: 6.95m × 3.0m × 2.2mCapacity: ≥20 ppmYield: ≥99.0%

Application: This equipment is applied in battery cell electrolyte filling, and is a customized machine. Our design varies from customers' requirements, the brief information is as follows: Parameters:Size: 9.5m × 2.0m × 2.2mCapacity: varies customers' requirementsYield: ≥99.9%Cell: cylindrical cells, prismatic cells

Application: The machine uses semi-automatic to complete the thickness measurement of the battery cell. This equipment includes: bottom frame, lithium battery fixture platform, thickness measuring mechanism, Z-axis guide mechanism, lever balance mechanism, etc. The mechanical part uses servo motors to realize the connection between various actions. The control part is composed of the HMI (human-machine…

Application: This machine is applied to cylindrical cell double-side welding. Functions are: the welding head can rotate by 180°, the welding is consistent, the welding needle is not sticky, the welding needle wear is automatically compensated, the poor welding alarm, real-time monitoring, recording, welding current automatic feedback compensation, motion controller, display and non-array battery pack,…

Application: This equipment is applied for the cell stacking process and is a customized machine. Our design varies customers' requirements, the brief information is as follows: Parameters: Size: 9.45m × 6.1m × 2.8mCapacity: ≥3 ppm (31 layers)Range: Lmax / 150mm, Wmax / 120mmAccuracy: ±0.1mm

Features:Used for MOBILE PHONE,TWS,TP,LAPTOP, WIRELESS CHARGER, FPC etc..Compact design, less space,can mount two different accessories in one machine.Use CCD positioning, high precision, no need to use fixtures, save a lot of fixture costs, fast line change.Can read QR code, upload MES, traceable.Using belt transmission, no jigs are required, reducing product collisions, reducing the risk of…

Application: The machine automatically completes the welding process of the PCM board of the battery cell. The machine is equipped with an edge gateway, a data acquisition system, a code scanning card station, and a real-time data upload and traceability management MES system. Adopting four process mechanisms of the turntable: feeding and discharging process position,…